Metric Subregularity in Generalized Equations

In this article, we study the metric subregularity of generalized equations using a new tool of nonsmooth analysis. We obtain a sufficient condition for a generalized equation to be metrically subregular, which is not a necessary condition for metric regularity, using a subtle adjustment of the Mordukhovich coderivative. We apply these results to the study of the metric subregularity in a Cournot duopoly game.     

Integral Representations of the Large and Little Schröder Numbers

In the paper, the authors establish several integral representations for the generating functions of the large and little Schröder numbers and for the large and little Schröder numbers.     

驻波声场中单分散细颗粒的相互作用特性

利用外加声场促进悬浮在气相中的细颗粒发生相互作用,进而引起颗粒的碰撞和凝并,使得颗粒平均粒径增大、数目浓度降低,是控制细颗粒排放的重要技术途径.为探究驻波声场中单分散细颗粒的相互作用,建立包含曳力、重力、声尾流效应的颗粒相互作用模型,采用四阶经典龙格-库塔算法和二阶隐式亚当斯插值算法对模型进行求解.将数值模拟得到的颗粒声波夹带速度和相互作用过程与相应的解析解和实验结果进行对比,验证模型的准确性.进而研究颗粒初始条件和直径对相互作用特性的影响.结果表明,初始时刻颗粒中心连线越接近声波波动方向、颗粒位置越接近波腹点,颗粒间的声尾流效应就越强,颗粒发生碰撞所需要的时间就越短.研究还发现,颗粒直径对颗粒相互作用的影响取决于初始时刻颗粒中心连线偏离声波波动方向的程度.当偏离较小时,颗粒直径越大,颗粒发生碰撞所需要的时间越短;当偏离很大时,直径较小的颗粒能够发生碰撞,而直径较大的颗粒则无法发生碰撞.     

Conversion of Methanol to Aromatic-Rich Gasoline over High-Efficiency Bifunctional Catalysts: Green Synthesis of GaZSM-5 Zeolites via Dry-Gel Conversion Strategy

Russian Journal of Applied Chemistry - Nanoscale ZSM-5 (AlZ5-D) and Ga-substituted ZSM-5 zeolites ((Al,Ga)Z5-D and GaZ5-D) were synthesized by a green dry-gel conversion strategy. For comparison,...     

Polypyrrole Shell@3D‐Ni Metal Core Structured Electrodes for High‐Performance Supercapacitors

Three‐dimensional (3D) nanometal films serving as current collectors have attracted much interest recently owing to their promising application in high‐performance supercapacitors. In the process of the electrochemical reaction, the 3D structure can provide a short diffusion path for fast ion transport, and the highly conductive nanometal may serve as a backbone for facile electron transfer. In this work, a novel polypyrrole (PPy) shell@3D‐Ni‐core composite is developed to enhance the electrochemical performance of conventional PPy. With the introduction of a Ni metal core, the as‐prepared material exhibits a high specific capacitance (726 F g^?1 at a charge/discharge rate of 1 A g^?1), good rate capability (a decay of 33 % in C_sp with charge/discharge rates increasing from 1 to 20 A g^?1), and high cycle stability (only a small decrease of 4.2 % in C_sp after 1000 cycles at a scan rate of 100 mV s^?1). Furthermore, an aqueous symmetric supercapacitor device is fabricated by using the as‐prepared composite as electrodes; the device demonstrates a high energy density (≈21.2 Wh kg^?1) and superior long‐term cycle ability (only 4.4 % and 18.6 % loss in C_sp after 2000 and 5000 cycles, respectively).     

A Magnetic Nanoparticle-Based Time-Resolved Fluoroimmunoassay for Determination of the Cytokeratin 19 Fragment in Human Serum

A sensitive, rapid and novel measurement method for cytokeratin 19 fragment (CYFRA 21–1) in human serum by magnetic particle-based time-resolved fluoroimmunoassay (TRFIA) is described. Built on a sandwich-type immunoassay format, analytes in samples were captured by one monoclonal antibody coating onto the surface of magnetic beads and “sandwiched” by another monoclonal antibody labeled with europium chelates. The coefficient variations of the method were lower than 7 %, and the recoveries were in the range of 90–110 % for serum samples. The lower limit of quantitation of the present method for CYFRA 21–1 was 0.78 ng/ml. The correlation coefficient of CYFRA 21–1 values obtained by our novel TRFIA and CLIA was 0.980. The present novel TRFIA demonstrated high sensitivity, wider effective detection range and excellent reproducibility for determination of CYFRA 21–1 can be useful for early screening and prognosis evaluation of patients with non-small cell lung cancer.     

Microtextures Induced by Nanosecond Laser on Ni–Co Alloy Coatings

Ni–Co alloys have a wide range of applications in various fields owning to their excellent physical, chemical, and mechanical properties. In this paper, we prepare Ni–Co alloy coatings on 316L stain steel surfaces by electroplating. We present a novel approach utilizing a nanosecond laser to induce microtextures on Ni–Co alloy coatings. We study experimentally the effects of laser power and scanning rate on the surface morphologies of Ni–Co alloy coatings. The results indicate that the shape and size of induced microtextures can be controlled by the laser power and scanning rate. The size of grains increases with increase in the work current of the laser (WCL) at a certain scanning rate. With the WCL constant, the size of grains decreases with increase in scanning rate while their average height increases. It is a simple and easily-controlled method for the fabrication of microstructures on Ni–Co alloy coatings, which has promising applications in investigations of the properties of microtextured surfaces, such as friction, adhesion, and wetting.